AroX1™
Argon | O2 | Cylinder | Valve |
99% | 5% | 50 Lit, 200 Bar | 5/8” BSP Female RH |
Argon | O2 | Cylinder | Valve |
99% | 5% | 50 Lit, 200 Bar | 5/8” BSP Female RH |
This blend is primarily used for spray transfer on stainless steels. One percent oxygen is usually sufficient to stabilize the arc and improve the droplet rate and bead appearance
Argon | O2 | Cylinder | Valve |
98% | 2% | 50 Lit, 200 Bar | 5/8” BSP Female RH |
This blend is used for spray arc welding of carbon steels, low-alloy steels and stainless steels. It provides greater wetting action than the 1% oxygen mixture. Weld mechanical properties and corrosion resistance of welds made with 1% and 2% oxygen additions are similar. However, bead appearance will be darker and more oxidized for the 2% blends with stainless steels.
Argon | Co2 | Cylinder | Valve |
95% | 5% | 50 Lit, 200 Bar | 5/8” BSP Female RH |
This blend provides a more fluid but controllable weld pool. It is the most commonly used argon-oxygen mixture for general carbon steel welding. The additional oxygen also permits higher travel speeds.